Tuesday, July 27, 2010

Parts Installed and More Pics!

2003 CCC Motard


My latest additions to the Super Duper Motard include the trail tech veypor (speedo/tach/temp/odo), My custom all black seat, and fastway footpegs.

The veypor was very easy to install so far I used the original power and rpm lead from the stock guages and installed the temperature fitting with a simple hose cut and clamp. The speedo portion will have to wait for my USD conversion as the sensor will mount on the fork guard and most likely will have to drill the rotor to install the magnet.

I removed the black seat from my old derbi to use on the ultimate derbi, but still have to find a better permanent solution to mounting the small battery to the underside of the seat.

Fastway pegs were also removed from my old motard and were filthy phil for real. After a degrease, clean, polish, and hand painting of the logo they were installed on the ultimate Derbi.

While awaiting CN racings completion of my GPR caliper bracket to fit on the USD forks I plan to remove my expansion chamber and find a place to either nickel plate or ceramic plate. Still uncertain on what will look best on this bad boy.

Also now considering a motor swap already for a KTM 85/105sx motor!

Thursday, July 8, 2010

New toy!

My vapor guage arrived today! With the wires in the kit that need to
be run and the unused wires on my new motard it should be fairly easy
to install. Might pull the harness back out to wire everything on the
bike as cleanly as possible. To maintain the title of sickest derbi
everything needs to be sick! Stay tuned for the rest of the finishing
touches.....

Sunday, July 4, 2010

New 2010 CCC Derbi Supermotard

Well I have a new bike on the stable!